Carbon filament for 3D printers
3D printing with carbon filament creates extremely stiff and durable models.
Most filaments like PLA, ABS, PETG or nylon are reinforced with carbon fibers. Disadvantage of the carbon filament is increased wear of the nozzle. A hardened or coated nozzle is recommended for use.
Carbon: 91 products
-
Fiberlogy Nylon PA12 + CF15, 1.75 mm / 500 g
- Reinforced with carbon fibres
- High tensile strength
- High rigidity
-
Polymaker PolyMide PA612-CF Black, 1.75 mm (500 g)
- With carbon fibres
- Based on PA6 & PA12
- Insensitive to moisture
-
-
Polymaker PolyMide PA6-CF Black, 1.75 mm / 500 g
- Excellent thermal properties
- High mechanical resistance
- Good layer adhesion
-
Fillamentum Nylon CF15 Carbon, 1.75 mm (600 g)
- High strength
- High thermal resistance
- High chemical resistance
-
Extrudr Green-TEC PRO Carbon, 1.75 mm / 800 g
- Fibre-reinforced BIO material
- Exceptional mechanical properties
- High thermal resistance up to 165 °C
-
eSUN ePA12-CF Natural, 1.75mm / 1000g
- Low moisture absorption
- High strength & toughness
- Temperature resistant
-
colorFabb PA-CF, 1.75 mm (700 g)
- Special polyamide formula
- Nearly without warping
- Carbon fibre content
-
FormFutura CarbonFil™ Black, 1.75 mm / 500 g
- High impact strength
- Unique mix
- Excellent viscoelasticity
-
eSUN ePA-CF Natural, 1.75 mm / 1000 g
- High rigidity & toughness
- High impact resistance
- High abrasion resistance
-
Fiberlogy PCTG+CF Black, 1,75 mm / 750 g
- With 10% carbon fibre
- Carbon finish
- High rigidity & tensile strength
-
Fillamentum CPE CF112 Carbon, 2.85 mm (600 g)
- Long-term stability
- Chemical resistance
- High durability
-
Spectrum Carbon PETG, 1.75mm / 500g
- Increased stiffness, hardness & tensile strength
- Matt surface
- Low shrinkage
-
Polymaker PolyLite PLA-CF Black, 1.75 mm / 1000 g
- With PLA properties
- Reinforced with carbon fibres
-
Nobufil PETG CF Black, 1,75 mm / 1000 g
- Made from recycled industrial waste
- Very good resistance to chemicals
- High rigidity & strength
-
Creality Hyper PLA-CF Black, 1.75 mm / 1000 g
- High strength & layer adhesion
- Printing speed up to 300 mm/s
- Low shrinkage & deformation resistance
-
AddNorth Rigid X Black, 2.85 mm / 1000 g
- Carbon fibre reinforced PETG
- Chemical, heat and UV resistance
- Perfect for vehicle parts
-
Spectrum ASA-X CF10 Black, 1.75mm / 1000g
- Composite material
- With 10% carbon fibre filling
- Excellent mechanical properties
-
eSUN ePLA-CF Black, 1.75 mm / 1000 g
- Reinforced with carbon fibre
- High strength
- Matt surfaces & sandblasted texture
-
R3D Carbon Black, 1.75 mm / 800 g
- Superior rigidity
- Improved dimensional stability
- High UV resistance
-
eSUN ePAHT-CF Natural, 1.75 mm / 750 g
- High strength & rigidity
- High toughness & impact resistance
- High chemical resistance
-
SUNLU PLA Carbon Fibre Black, 1.75 mm / 1000 g
- High strength & stiffness
- Low density
- Matt surface finish
-
eSUN ePLA-CF Red, 1.75 mm / 1000 g
- Reinforced with carbon fibre
- High strength
- Matt surfaces & sandblasted texture
-
Polymaker Polymide PA12-CF Black, 1.75 mm / 500 g
- Excellent mechanical properties
- High thermal resistance
- Carbon fibre reinforced
All prices excl. VAT.
Discover popular categories
Magazine Articles:
Discover 3DJake:
More than 10.200 products
We deliver worldwide to
more than 40 countriesSecure payments
with SLL encryption technology
